How to start hp laptop in safe mode windows 10?

If you are thinking about Can Windows 10 start in Safe Mode? Yes, it can. Sometimes there is a situation where you have to boot into Window’s Safe mode and this is what all is explained in the article. With Windows 7 it is easy to enter the safe mode however, with Windows 10 on your computer and PCs is complicated.

Windows 10 safe mode hp

If you are having issues with Windows operating system on your hp pavilion, hp EliteBook or hp stream then the primitive step is to troubleshoot it to boot into the safe mode. The safe mode only loads the most important files and drivers. It’s an easy way to eliminate the variables as much as possible for making sure that the issue doesn’t occur at the basic level. However, the traditional way to get into the safe mode is to boot the PC and press F8 simultaneously on the desktop.

How to Enter Safe Mode before Windows 10 or 8 Boots?

  1. First of all, you have to click on the “Start” option followed by the “Power” option. Now, you have to press down the “Shift” key when you click on the “Restart” button.
  2. On-screen you will see a full-screen menu, you just have to tap on the “Troubleshoot” option and then click on advanced option followed by the “Startup Settings” option.
  3. There is a “Startup settings” screen on your desktop, just tap on the “Restart” option. Wait for the PC to reboot and show you a startup settings screen.
  4. Now, you have to use the arrow keys on your keyboard and tap on the option labeled as “Enable safe mode”.

Read the related article – Start your PC in safe mode in Windows 10

What happens if windows 10 safe mode from bios does happen?

Reach to the login page and there you will find a “Power” button in the lower corner. Here the above instructions for windows 10 safe mode hp will work. However, if there is no login page then there are chances of Windows being so messed up that it cannot boot into the Safe Mode. Nevertheless, the tips and tricks given below can help you:-

  1. All you need is a Windows 10 recovery drive.
  2. You have to boot the recovery drive and choose your keyboard layout.
  3. Just tap on the “Troubleshoot” option followed by “Advanced options and “Command Prompt.
  4. Here at the command prompt, you just have to fill up these three commands and make sure you press enter after entering each command:
    • C:
    • bcdedit /set {default} bootmenupolicy legacy
    • exit
  5. Now, turn off your PC, laptop or Desktop of your computer systems.
  6. Now, you have to boot the computer followed by press and release of F8 key continuously till you see the Advanced Boot Options visible on-screen.
  7. After this, you can choose “Safe mode” option from your desktop screen.

Note:- If you are stuck in between the steps mentioned above then it is advisable to visit the HP Support webpage for technical assistance.

Conclusion:

It is a wise recommendation to download HP Solutions Framework while working with HP devices to avoid interruption in the working process. Moreover, you can visit the HP customer support page to get your queries resolved within no time. The expert technical advice will help you with the best possible solution.

Add a Comment

Your email address will not be published. Required fields are marked *